Flow Rate Monitoring - Direct Connection


EVO Flow Rate - Config - Direct.psd

YOUR CONFIGURATION:

DIRECT ATG CONNECTION

With this method of achieving Flow Rate Monitoring, an EVO™ Series Automatic Tank Gauge (ATG) can connect directly to a Point-of-Sale or Forecourt Controller without the need for a Dispenser Interface Module to be installed in the ATG. Check out your equipment list below.

HERE'S WHAT TO ORDER:

For Verifone® Commander, Allied ANDI, Allied NexGen, Radiatn Point-of-Sale, and Gilbarco® Forecourt Controllers that support the Business Inventory Reconciliation (BIR) communication protocol:

 

1. EVO™ Series ATG

Model Description

EVOXXX

EVO™ 200, EVO™ 400, EVO™ 550, EVO™ 5000, EVO™ 600,  or EVO™ 6000

NOTE: The EVO™ Series ATG must have either an open and available RS-232 port  - OR -  Ethernet port.

2. EVO™ Series Software

If (R) Reconciliation Software is already installed on an existing EVO™ Series ATG, the (TS-FLOW) Flow Rate Monitoring Field Upgrade Software can be added. If (R) Reconciliation Software is not installed, (TS-TRAC-F) Reconciliation & Flow Rate Monitoring Field Upgrade Software should be added.

Model Description

R

Reconciliation Factory Installed Software

TS-FLOW

Flow Rate Monitoring Field Upgrade Software

- OR -

Model Description

TS-TRAC-F

Reconciliation & Flow Rate Monitoring Field Upgrade Software

 

3. Customer Supplied Cables

RS-232 Cable  - OR -  Ethernet Cable

DOWNLOAD THE ORDERING GUIDE

EVO™ SERIES AUTOMATIC TANK GAUGES

EVO™ Series ATGs provide highly accurate inventory management and full-featured compliance monitoring for any size fuel system – plus advanced features like Flow Rate Monitoring, Corrosion Control™ System automation and monitoring, Electronic Line Leak Detection, and DEF/AdBlue® recirculation.

LEARN MORE