EVO™ 600 & EVO™ 6000
EVO™ 600 & EVO™ 6000
EVO™ 600 & EVO™ 6000 provide highly accurate inventory management and full-featured compliance monitoring for any size fuel system. Being module-based, the EVO™ Series is
highly configurable for site-specific probe and sensor requirements. Their simple setup and operation, remote connectivity, and advanced security features protect your fuel system while keeping you directly connected to vital site data whenever, and wherever. The highly-intuitive, full-color, icon-based touch screen provides user-friendly on-site access to inventory, alarm, and compliance data.
The new EVO™ 600 and EVO™ 6000 represent the next step in the evolution of Automatic Tank Gauges. Evolving with the changing needs of station owners and operators, the EVO™ 600 and EVO™ 6000 provide new capabilities to make fuel management even easier for every user.
The EVO™ 6000 and EVO™ 6000 ATGs provide highly accurate inventory management and full-featured compliance monitoring for any size fuel system – plus advanced features like Corrosion Control™ System automation and monitoring, Electronic Line Leak Detection, and DEF/AdBlue® recirculation. Check out all of the new features available on the EVO™ 600 and EVO™ 6000.
NEW: Corrosion Control™ System
Proactively monitor for and remove corrosion-causing water from your fuel system with system automation and monitoring.
NEW: Multiplexing Sensor Hub
Add the Corrosion Control™ System or additional sensors to existing sites without having to break concrete to run new wires.
NEW: Flow Rate Monitoring
Detect and react to potential slow flow issues with automated daily reporting and alarms, helping to improve flow rates and dispenser throughput.
NEW: Security Features
NEW: User Interfaces
Two additional One-Touch buttons, a shallower menu structure, and remote access via FFS PRO® Connect make navigation easy for every user-type.
NEW: Faster Processing
An all new faster processor enables the ATG to reboot in just seconds after firmware updates, keeping stations open and operational.
Input Capacity
EVO™ 600 can support up to 36 sensors and 36 probes, while the EVO™ 6000 can support up to 72 sensors and 72 probes.
Turbine Pump Interface
Enhanced remote pump monitoring and control including pump-in-water automation, clogged intake escalation, tank leveling, and tank priority.
Remote Communication
The FFS PRO® Connect web interface allows users to securely connect directly to an EVO™ Series ATG from any web enabled device.
Inventory Reconciliation
Inventory Reconciliation is an automated leak detection function that analyzes tank volume, deliveries, and sales data to detect releases with a high level of accuracy.
Tank Autocalibration
Eliminate discrepancies in delivery reporting and daily reconciliations caused by inaccurate tank information programmed into the ATG with this function that automatically generates a highly accurate tank strapping chart.
Electronic Line Leak Detection
Electronic line leak detection (ELLD) learns the characteristics of each line, eliminating possible configuration errors and ensures unparalleled leak detection accuracy.
DEF/AdBlue® Recirculation
Get automated control of your Diesel Exhaust Fluid (DEF) system while preventing frozen lines with energy and cost-saving recirculation functionality.
We are driven by our pursuit to innovate, simplify, secure, and connect every station owner to their fuel management system. EVO™ 600 and EVO™ 6000 ATGs feature simple setup and operation, remote connectivity, and advanced security features to protect your fuel system while keeping you directly connected to vital site data whenever, and wherever.
Highly Capable
EVO™ Series ATGs keep your site in compliance and protected from security threats with customizable user roles, user activity tracking, and up to 3-years of data back-up to protect against power outages or other system interruptions.
Simple Interface
A full-color 7” LCD touchscreen serves up one of the most intuitive user interfaces available with simplified user features you won’t find anywhere else.
Secure Data
EVO™ Series ATGs keep your site in compliance and protected from security threats with customizable user roles, user activity tracking, and up to 3-years of data back-up to protect against power outages or other system interruptions.
A full-color 7” LCD touchscreen serves up one of the most intuitive user interfaces available with simplified user features you won’t find anywhere else. You choose your home screen, you program your product colors, and you choose what shows up on your Favorites screen. Customize the interface to meet your business needs the way you operate. Check out the interactive demo below.
CLICK ON THE INTERACTIVE TOUCHSCREEN BELOW
Icon-Based Design
Designed to be understood easily and operated intuitively. It’s simple to operate for new users and can reduce the amount of training required to operate.
One Touch Buttons
You can customize these home screen buttons to automate and carry out anything from complex, multi-function processes to simple daily delivery report generation - all with the touch of a single button.
Quick Jump Menu
Navigate quickly from application to application with ease. This time-saving menu makes the interface’s structure extremely shallow, simple to navigate, and reduces the amount of steps it takes to accomplish tasks.
EVO™ Series ATGs help keep sites in compliance while providing marketers with the highest level protection from the security threats facing our industry.
Unlimited User Roles
Unlimited, customizable user roles and log-in security features protect against unwanted access while keeping track of user activity.
Data Protection
The latest in industry standard TLS/SSL protocols ensure data encryption between web browsers and the ATG.
Integrated Wifi
Optional integrated Wifi allows secure and protected onsite viewing of inventory levels for fuel delivery drivers.
Turbine Pump Interface is a powerful tool that creates a network between your Submersible Turbine Pump (STP) controllers and EVO™ Series ATGs. Through TPI, the tank gauge can be programmed to respond to faults in the submersible pumping system and react with intelligence that pump controllers alone cannot.
SEE TPI IN ACTIONPump In Water Automation
When the water level in a tank approaches the pump intake, the tank gauge will enter alarm mode and automatically shut down the pump, protecting the system and consumers from water being pumped from that tank.
Leveling & Priority Modes
When managing two storage tanks of the same product ‘Leveling Mode’ can keep both tanks at the same percentage full without the use of a syphon bar between the two tanks.
Remote Pump Interaction
By networking the intelligent controllers to the fuel management system via TPI, a technician can remotely connect to the site to review the logged event history and view the status.
EVO™ 600 and EVO™ 6000 ATGs offer additional advanced features and capabilites to manage your entire system as efficiently as possible.
WATCH THEM IN ACTIONAutoLearn™ Technology
Patented AutoLearn™ electronic line leak detection capability including Statistical Line Leak Detection for high throughput sites.
Corrosion Control™ System
Proactively monitor for and remove corrosion-causing water from your fuel system with system automation and monitoring powered by EVO™ 600 or EVO™ 6000 ATGs.
Streamlined Setup
Hardware auto-detection and wiring confirmation, multipoint tank charting, network printer auto-detection, and the ability to download and upload entire programming profiles from one ATG to another.
Improve dispenser throughput and maintain fast flow rates with the ability to detect and react to potential slow flow issues before they impact business with Flow Rate Monitoring. Available as a software option on new EVO™ Series ATGs or as a field upgrade option, Flow Rate Monitoring delivers ongoing flow rate performance data, flow rates for each fueling point, and provides a notification if transactions dip below a user-defined set point.
FLOW RATE MONITORING SELECTION GUIDEKnow Your Flow
Monitor for and ensure fast and consistent dispenser throughput with daily reports and alarm notifications regarding flow rate performance.
Performance Monitoring
Sales and dispensing duration data are automatically reconciled to help you better understand the flow performance of every fueling point.
Proactive Maintenance
Often, slow flow rates can indicate that a dispenser filter needs to be changed. Be proactive in calling for maintenance, getting dispensers back to peak performance sooner.
The EVO™ 600 and EVO™ 6000 are compatible with the Corrosion Control™ Water Separator and Corrosion Detection Sensor, allowing owners to fully automate the removal of corrosion-causing water from tanks and monitor for corrosive environments.
VIEW THE CORROSION CONTROL™ SYSTEM
Corrosion Control™ App
Get access to system data including Water Separator status, water levels, flow status, and more through the Corrosion Control™ Application, now standard on EVO™ 600 and EVO™ 6000 ATGs.
Corrosion Detection Sensor
The Corrosion Control™ Corrosion Detection Sensor provides proactive automated detection and preventative notification of a corrosive environment in the tank ullage space.
EVO™ Series Upgrade Kit
Get all the Corrosion Control System capabilities of the EVO™ 600 or EVO™ 6000 on an existing EVO™ 550 or EVO™ 5000 with the easy-to-install EVO™ Series Upgrade Kit.
The FFS PRO® Connect web interface allows you to securely connect directly to your EVO™ Series ATG from any web enabled device. It automatically scales for tablets and smart phones, meaning no app to download.
INTERACTIVE DEMO
The EVO™ Series family of ATGs offers four different options with right-sized features to meet the requirements of your specific application, size, and compliance needs. Which ATG is right for your application?
ATG SELECTION GUIDEThese module-based ATGs are highly configurable for site-specific probe and sensor requirements. Their simple setup and operation, remote connectivity, and advanced security features protect your fuel system while keeping you directly connected to vital site data whenever, and wherever. The highly-intuitive, full-color, icon-based touch screen provides user-friendly on-site access to inventory, alarm, and compliance data.
- Allows you to make informed, data-driven inventory management decisions while keeping your site in compliance and protected from security threats.
- Included Features: Inventory monitoring, Turbine Pump Interface (TPI) capability for enhanced and automated submersible turbine pump control, static tank testing, and containment compliance monitoring.
- Optional Features: 24-hour Statistical Continuous Automatic Leak Detection (SCALD®), tank autocalibration, inventory reconciliation, and flow rate monitoring.
- Patented AutoLearn™ electronic line leak detection capability including Statistical Line Leak Detection for high throughput sites.
- Streamlined setup and programming includes hardware auto-detection and wiring confirmation, multipoint tank charting, network printer auto-detection, and the ability to download and upload entire programming profiles from one EVO™ to another.
- Intuitive full-color 7" (17.78 cm) LCD touch screen interface provides simplified on-site access features including:
- Up to Six (6) One Touch Buttons that are custom programmed to carry out common automated tasks with a single tap.
- A Quick Jump Menu that allows you to quickly maneuver from application to application using a single button.
- Programmable product colors for each tank.
-
FFS PRO® Connect allows you to remotely connect to your EVO™ from any web-enabled device.
-
Optional WiFi allows secure and protected on-site viewing of inventory levels for fuel delivery drivers.
-
Compatible with the Multiplexing Sensor Hub™ (FMP-MSH).
-
Compatible with Corrosion Control™ Water Separator.
-
Supports MQTT protocol, the standard for IoT messaging, for enhanced security of data transmission
Components
- There can only be three types of one module, except for the UDP Module, which allows for up to six in an EVO™ or Expansion Console.
- If you require more than three types of one module (other than the UDP Module) in an EVO™ or Expansion Console, please contact your FFS sales representative to review your needs.
- The intrinsically safe barrier must be installed in the third slot or greater. (The third slot after the power supply module.)
1. Cover
2. LCD Touch Screen
3. LED Indicators
4. Printer
5. Mounting Tabs
6. Cooling Vents
7. Module Slots
8. Communication Ports
9. Annunciator (audible alarm)
10. Ethernet Port 1
11. Ethernet Port 2
12. USB Port (Type-A)
13. USB Port (Mini-B)
14. RS-232 Comm Port 1
15. WiFi
16. Bus Extension
17. RS-232 Comm Port 2
18. RS-485 / TPI
19. Controller Module
20. Power Supply Module
21. AC Input Module (TS-ACI)
22. 10 Amp Relay Module (TS-10ARLY)
23. I/O Module (TS-IO)
24. 4-20mA Module EXP (TS-420EXP)
25. Relay Module (TS-RLY)
26.Blank
27.Intrinsically Safe Barrier
28.Probe Module (TS-PRB)
29.4-20mA Module (TS-420IB)
30.2-Wire Sensor Module (TS-2WSNS)
31.3-Wire Sensor Module (TS-3WSNS)
32.RS-485 Module (FMP-485IS)
33.UDP Module (FMP-UDP9)
Specifications
| Maximum tanks monitored (stand-alone) | 48 (EVO™ 600) / 72 (EVO™ 6000) |
| Maximum tanks monitored, with accessories | 132* (EVO™ 600) / 168* (EVO™ 6000) |
| Maximum sensor input capacity (stand-alone) | 48 (EVO™ 600) / 108 (EVO™ 6000) |
| Maximum sensor input capacity, with accessories | 180* (EVO™ 600) / 244* (EVO™ 6000) |
| Maximum total inputs (stand-alone) | 72 (EVO™ 600) / 132 (EVO™ 6000) |
Maximum total inputs, with accessories |
276* (EVO™ 600) / 336* (EVO™ 6000) |
Maximum AC input channels (stand-alone) |
36 (EVO™ 600) / 36 (EVO™ 6000) |
| Maximum AC input channels, with accessories | 72* (EVO™ 600) / 72* (EVO™ 6000) |
| Maximum relay output channels (stand-alone) | 26 (EVO™ 600) / 26 (EVO™ 6000) |
| Maximum relay output channels, with accessories | 50* (EVO™ 600) / 50* (EVO™ 6000) |
| Dry contact input channels | 2 |
| Connectivity | Ethernet (qty 2). RS-232, RS-485, standard USB, Mini-B USB |
| Display type | 7" (17.78 cm) color LCD touch screen |
| Printer type | Thermal (also network or USB) |
| Alarm | Internal audible alarm |
| LEDs | Alarm, warning, and power |
| Applicable liquids | Petroleum, chemicals, and waste |
| Level units | Inches, centimeters, and millimeters |
| Volume units | Gallons or liters (mass with density option) |
| Power requirements | 110 to 240 VAC, 50/60 Hz, 1.5 Amps |
| Operating temperature | 32° to 104° F (0° to 40° C) |
| Humidity | 0-90% non-condensing |
| EVO™ 600 | H: 11.75"(300 mm), W: 10¼"(260 mm), D: 9"(229 mm) |
| EVO™ 6000 | H: 11.75"(300 mm), W: 16½"(419 mm), D: 9"(229 mm) |
| Alarm set points | High/low product, water, and temperature |
| Technical Advantages | Inventory reconciliation/tank autocalibration/flow rate monitoring |
| Measurements | Density, mass, and phase separation measurement |
| Notifications | Email and SMS |
| Programming | Back-up generator monitoring/conditions |
| Advanced Logic Control | DEF/AdBlue® recirculation system |
| Support | MODBUS™ |
| Approvals | UL, cUL, ATEX, IECEx, GSA IT Security |
| Certifications |
|
*Requires use of FMP-EXPC Expansion Modules and/or FMP-MSH Multiplexing Sensor Hubs.
Ordering Guide
EVO™ model, software and hardware options can be listed separately or combined when ordering. Systems shipped from the factory will list the combined part number. Complete part numbers have a specific order and are created using the following guidelines:
EVOX DPWIE / TRFLGC
- EVOX = Base Model Options
- EVO600 = EVO™ 600 base ATG
- EVO6000 = EVO™ 6000 base ATG
- DPWIE = Hardware Options (choose all that apply)*
- D = Display
- P = Printer
- W = Wifi
- I = Dispenser interface module
- TRFLGSC = Software Options (choose all that apply)
- T = SCALD 24-hour tank testing
- R or F
- R = Reconciliation/Autocalibration
- F = Reconciliation/Autocalibration with Flow Rate Monitoring
- L or G
- L = Line leak detection
- G = Generator Line Leak Detection
- S = Secondary Containment Monitoring
- C = DEF/AdBlue® recirculation, enhanced logic conditions including value, counter, value compare, and latch
Example: EVO600DPWI/TRL = EVO™ 600 base model with display, printer, WiFi, Dispenser Interface Module, SCALD®, Reconciliation/Autocalibration, and line leak detection.
EVO™ 600 and EVO™ 6000 Interface Modules
The EVO™ 600 and EVO™ 6000 come standard with a power supply module and a controller module. Additional interface modules can be installed. Interface modules ordered with an EVO™ will be installed at the factory. If you would like them to not be installed, please order the spare/replacement version of the module. The following guidelines must be followed:
- EVO™ 600: Six total modules can be installed with a maximum of four intrinsically safe modules and a maximum of three of any one kind of module, except for the UDP Module, which allows for a maximum of four modules.
- EVO™ 6000: Eleven total modules can be installed with a maximum of nine intrinsically safe modules and a maximum of three of any one kind of module, except for the UDP Module, which allows for a maximum of six modules.
Note: Do not include the Power Supply and Controller Modules when calculating total modules allowed.
Maximum UDP Modules Allowed to Run Concurrently with Probe Modules in a Single EVO™ Console or Expansion Console
The UDP Module is intended to replace the Probe Module for all new system orders. If you are planning to add UDP Modules to an existing EVO™ 600/6000 with Probe Modules, please adhere to the following table:
| Existing Probe Modules | Allowable UDP Modules |
| 0 | 6 |
| 1 | 4 |
| 2 | 2 |
| 3 | 0 |
Intrinsically Safe Modules
| Model Number | Description |
|---|---|
| FMP-485IS | Pre-installed RS-485 Module | 4 MSH inputs (allows for 24 total inputs) | Compatible with FMP-MSH multiplexing sensor hubs (EVO™ 600/6000 only) |
| FMP-UDP9 | Pre-Installed UDP Module | 12 inputs | Compatible with FMP-LL3-XXX and FMP-LL3-XXX-I probes, FMP-UHS and FMP-ULS sensors, and FMP-XXX-U sensors (EVO™ 600/6000 only) |
| TS-2WSNS | Pre-Installed 2-Wire Sensor Module | 12 inputs | Compatible with FMP-HFS2, FMP-UHS, FMP-ULS, TSP-HLS-XX, and TSP-HLS-XX/SS sensors |
| TS-3WSNS | Pre-Installed 3-Wire Sensor Module | 8 inputs | Compatible with FMP-DDS*, FMP-DIS*, FMP-DTS*, FMP-EIS*, FMP-HIS*, FMP-HIS-XL*, FMP-UHS*, FMP-ULS*, TSP-DVS, TSP-HLS-XX, and TSP-HLS-XX/SS sensors |
| TS-PRB | Pre-Installed Probe Module | 12 inputs | Compatible with TSP-LL2-XXX, TSP-LL2-XXX-I, FMP-LL3-XXX, and FMP-LL3-XXX-I probes; TSP-DMS-XX and FMP-XXX-U sensors; and VFM vapor flow meters |
| TS-420IB | Pre-Installed 4-20 mA Module | 8 inputs | Intrinsically Safe | Compatible with TS-LSU500/X transducers and FMP-TEM, TS-VPS, and TS-SCCM sensors |
- -U sensors are not supported on the 2-wire or 3-wire sensor module.
Non-Intrinsically Safe Modules
| Model Number | Description |
|---|---|
| TS-10ARLY | Pre-Installed 10 Amp Relay Module | 6 outputs | 10 Amp | Compatible with high power dispenser shutdown control functions |
| TS-420EXP | Pre-Installed 4-20 mA Module | 8 inputs | Explosion-Proof | Compatible with TS-LSU500/X transducers and FMP-TEM, TS-VPS, and TS-SCCM sensors |
| TS-ACI | Pre-Installed AC Input Module | 12 inputs | Compatible with dispenser hook signal monitoring functions |
| TS-IO | Pre-Installed Input Output Module | 4 4-20 mA outputs | 8 3-240 VAC/DC inputs | Compatible with remote monitoring control and building monitoring system interfacing functions |
| TS-RLY | Pre-Installed Relay Module | 8 outputs | 2 Amp | Compatible with TS-LSU500/X transducers, TPI, and TS-SCCM control functions |
- TS-RLY Module is not required for STP control when utilizing turbine pump interface (TPI) communications. The TS-420EXP module requires Controller Module software version 9.5 or greater Do not include Power Supply and Controller Module when calculating total modules allowed.
Expansion Consoles
The EVO-EXPC2 must follow the same guidelines as the EVO™ 600, and the EVO-EXPC must follow the same guidelines as the EVO™ 6000.
| Model Number | Description |
|---|---|
| EVO-EXPC | Secondary console to add eleven additional plug-in modules to the primary TS-550, TS-5000, EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000 ATG, comes without a display or printer |
| EVO-EXPC2 | Secondary console to add six additional plug-in modules to the primary TS-550, TS-5000, EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000, comes without a display or printer |
EVO™ 600 & EVO™ 6000 Hardware & Software Field Upgrades
The following software and hardware options can be added to customize your EVO™ once it's been installed in the field.
Hardware Field Upgrades
| Model Number | Description |
|---|---|
| EVO-DISPREP | Display upgrade for an EVO™ 600/6000, EVO™ 550/5000 with existing Interface Board REV 4 or lower |
| EVO-TMPTR | Thermal internal printer assembly upgrade for an existing EVO™ 600/6000, EVO™ 550/5000, comes with one roll of printer paper |
| FMP-WIFI | WiFi upgrade for an existing EVO™ 200/400, EVO™ 600/6000, includes 4.5" antenna |
| EVO-DIMIB | Internal Dispenser Interface Module upgrade for an existing EVO™ 600/ 6000, dispenser interface cable must be ordered separately |
Dispenser Interface Module Cables
| Model Number | Description |
|---|---|
| TSP-BDCBL | Bennett® 515 only cable |
| TSP-GDCBL | Gilbarco™ cable |
| TSP-GSDCBL | Gilbarco™ G-Site™ cable |
| TSP-WDCBL | Wayne™ cable |
Internal Software Field Upgrades
| Model Number | Description |
|---|---|
| TS-TT | Statistical Continuous Automatic Leak Detection (SCALD®) 24-hour tank testing |
| TS-TRAC | Tank inventory reconciliation and autocalibration |
| TS-TRAC-F | Reconciliation/autocalibration and flow rate monitoring |
| TS-FLOW | Flow rate monitoring |
| TS-ELLD | Electronic line leak detection |
| TS-ELLD-G | Electronic line leak detection for generator applications |
| TS-SCM | Secondary containment monitoring |
| TS-CON | Enhanced logic conditions including value, counter, value compare, latch, and DEF/AdBlue® recirculation |
- Customers interested in SCM should see our EVO 550/5000 gauges.
- TS-CON also appropriate for DEF/AdBlue® recirculation.
EVO™ Series Upgrade Kit
Get all the Corrosion Control System capabilities of the EVO™ 600 or EVO™ 6000 on an existing EVO™ 550 or EVO™ 5000 with the easy-to-install EVO™ Series Upgrade Kit.
| Model Number | Description |
|---|---|
| EVO-600UPG | Upgrade kit for EVO™ 550 to EVO™ 600, includes control module, comm port cover, and EVO 600™ jewel |
| EVO-6000UPG | Upgrade kit for EVO™ 5000 to EVO™ 6000, includes control module, comm port cover, and EVO 6000™ jewel |
| EVO-600UPG-W | Upgrade kit for EVO™ 550 to EVO™ 600 with Wifi, includes control module, comm port cover, Wifi hardware, and EVO 600™ jewel |
| EVO-6000UPG-W | Upgrade kit for EVO™ 5000 to EVO™ 6000 with Wifi, includes control module, comm port cover, Wifi hardware, and EVO 6000™ jewel |
- Note: The serial number of the existing EVO™ must be provided when ordering an EVO™ Series Upgrade Kit.
EVO™ 600 and EVO™ 6000 Replacement Parts
| Model Number | Description |
|---|---|
| FMSP-485IS | Spare/Replacement RS-485 Module |
| FMSP-UDP9 | Spare/Replacement UDP Module |
| TSSP-2WSNS | Spare/Replacement 2-Wire Sensor Module. |
| TSSP-3WSNS | Spare/Replacement 3-Wire Sensor Module. |
| TSSP-420IB | Spare/Replacement 4-20mA Module, Intrinsically Safe |
| TSSP-10ARLY | Spare/Replacement 10 Amp Relay Module |
| TSSP-420EXP | Spare/Replacement 4-20mA Module, Explosion-Proof |
| TSSP-ACI | Spare/Replacement AC Input Module |
| TSSP-IO | Spare/Replacement Input/Output Module |
| TSSP-RLY | Spare/Replacement Relay Module |
| EVO-6CM | Spare EVO 600/600 controller module, standard features only, no software options |
| EVO-6CM/R | Replacement EVO 600/6000 controller module, factory programmed with required options |
| EVO-6CM-W/R | Replacement EVO 600/6000 controller module w/ Wifi, factory programmed with required options |
| TSSP-EXPPS | Expansion console power supply |
| TSSP-PS | Power supply module |
| EVO-DISPREP | Display upgrade for an EVO™ 600/6000, EVO™ 550/5000 with existing Interface Board REV 4 or lower |
| EVO-TMPTR | Thermal internal printer assembly upgrade for an existing EVO™ 600/6000, EVO™ 550/5000, comes with one roll of printer paper |
| TS-DIMIB | (I) Internal dispenser interface module, dispenser interface cable must be ordered separately |
| TSSP-TRMBLK | Package of 10 assorted terminal blocks |
| TSSP-PRB | Spare/Replacement Probe Module |
| EVO-EXPC | Secondary console to add eleven additional plug-in modules to the primary TS-550, TS-5000, EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000 ATG, comes without a display or printer |
| EVO-EXPC2 | Secondary console to add six additional plug-in modules to the primary TS-550, TS-5000, EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000, comes without a display or printer |
| TS-LON | (E) EcheLON™ communication module, IFSF protocol capability |
| TS-MDMIB | (M) Internal modem, includes fax and data software capability |
- The serial number of the old CM must be provided when ordering the EVO-6CM/R or the EVO-6CM-W/R.
- Only one TS-DIM or TS-LON module can be installed per ATG.
Featured
Brochures
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0941 Do More with EVO Series.pdf | 41.07 MB | |
 |
FFS-0792 EVO Series Brochure.pdf | 24.89 MB | |
 |
FFS-0743 EVO 600 & 6000 ATG Datasheet.pdf | 2.5 MB | |
 |
FFS-0791 EVO Series Selection Guide.pdf | 5.18 MB | |
 |
FFS-0779 EVO Series Upgrade Kits Brochure.pdf | 1.5 MB | |
 |
FFS-0628 EVO Series TPI Brochure.pdf | 11.25 MB | |
 |
FFS-0846 EVO Series Flow Rate Monitoring Brochure & Ordering Guide.pdf | 9.17 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0216 (UL) FFS Product Catalog.pdf | 62.67 MB | |
 |
FFS-0807 (EN) Product Catalogue.pdf | 48.43 MB | |
 |
FFS-0367 (UL) Site Starters Ordering Guide.pdf | 52.07 MB |
Manuals
Drawings
| Title | Type | Size | |
|---|---|---|---|
 |
CD_FMS_TS-EXPC_001.pdf | 0.09 MB | |
 |
CD_FMS_TS-EXPC_001.dwg | DWG | 0.48 MB |
 |
CD_FMS_EVO600_001.pdf | 0.1 MB | |
 |
CD_FMS_EVO600_001.dwg | DWG | 0.38 MB |