Menu Show/Hide Menu
Menu Show/Hide Menu
Probe Installation Kits

Probe Install Kits

Probe Install Kit Hero.psd
Probe Installation Kits

Probe Install Kits

Probe installation kits are used to install inventory and leak detection probes in underground storage tank applications using either 2" or 4" riser pipes.

Probe Install Kit Highlight.psd

EASY PROBE ACCESS

Probe install kits provide a tight seal to the tank to prevent water intrusion and meet regulatory requirements. A quick release cap enable easy access to the probe for inspection or maintenance.

Bottom Mount Kits

Bottom mount install kits provide the same tight seal and ease of access without the need for the suspension hardware necessary in leak detection applications.

Suspension Kits

For hanging probes, the suspension kit isolates the probe from possible tank deflection and also keeps in it a true vertical orientation for optimal float movement and measurement accuracy.

Chemical Kits

Chemical install kits are for use with chemical or other applications where it is desirable for the probe head to be outside of the riser. It consists of a #316 SS 4" cap and compression fitting that is installed on the probe shaft so that only the floats and shaft are exposed to the tank contents. These kits include a probe head protection kit.

Pressurized LPG Kits

Pressured LPG install kits are for use with pressurized LPG tanks where the probe head will reside outside of the tank opening. It consists of a special compression fitting, designed to retain the contents of the pressurized tank, that is installed on the probe shaft and then inserted into a user supplied cap with a 3/4" NPT hole. These kits include a probe head protection kit.

Suspension Kits

Model Number Description
TSP-K2A Leak detection probe install kit for 2" riser pipes
TSP-K2B Leak detection probe install kit for 2" riser pipes with BSP threads
TSP-K4A Leak detection probe install kit for 4" riser pipes
TSP-K4B Leak detection probe install kit for 4" riser pipes with BSP threads

Bottom Mount Kits

Model Number Description
TSP-C2A Inventory probe Install kit for 2" risers
TSP-C2B Inventory probe Install kit for 2" risers with BSP threads
TSP-C4A Inventory probe install kit for 4" risers
TSP-C4B Inventory probe install kit for 4" risers with BSP thread

Other Kits

Model Number Description
TSP-K4AS #3 16 stainless steel mag probe install kit for 4" riser pipes
TSP-K4ASL #3 16 stainless steel install kit for probes larger than 149"
TSP-LPGK LPG probe install kit, 149" maximum LL2 probe length
  • TSP-LPGK install kit is not needed when locally supplied tank isolation sleeve is utilized.

Cables

Model Number Description
600-0042 Belden™ #87761, runs up to 500'
600-0055 Belden™ #89182, runs 500' to 1,500'
600-0180 Transducer quick disconnect cable
  • Cable is sold in 500' increments.
  • Orders greater than 500' will ship in 1000' and 500' rolls.
  • Contact tech support for more information on cable requirements.

Accessories

Model Number Description
TSP-DB1 One direct burial splice connector kit
TSP-DB10 Pack of 10 direct burial splice connector kits
TSP-DBTOOL Epoxy dispensing tool
TSP-KW30 22-14 AWG (blue) splice connectors, 30 pack
TSP-UVPK Ultraviolet protection kit - protects probe electronics when installed in AST applications
  • Use the TSP-DB1 or TSP-DB10 for direct burial cable applications or when weatherproof junction boxes are not used.
  • The DBTOOL is required to dispense the epoxy.
  • Each direct burial splice connector kit includes a receptacle, three splice connectors and epoxy for the dispensing tool.