High Level Sensor
High Level Sensor
The HLS level sensor is an overfill prevention switch that may be adjusted to operate over a wide range of levels. The HLS is based on float-switch technology and is made of chemical-resistant materials to assure compatibility with most liquids.
High Level Sensor
- Each sensor is supplied with jacketed cable five feet in length.
- The normally-closed output circuit provides supervised operation, ensuring that broken wires and similar failures will not go undetected.
- A small magnetically-activated read switch is located inside the body of the sensor. Tiny magnets are positioned inside a lightweight float which is free to move up and down along the shaft so that the magnets are below the read switch. When the sensor is immersed in liquid, the float rises and the magnet activates the read switch, signaling the ATG that the high limit has been reached.
No matter what the monitoring application is, Franklin Fueling Systems offers a sensor solution tailored to the specific requirements of each application.
Let us help you choose the right sensor for your application.
SENSOR SELECTION GUIDE
Applications
- Overfill protection switch.
Theory of Operation
The secret to the HLS sensor's reliability is its float switch technology. A small magnetically-activated read switch is located inside the body of the sensor. Tiny magnets are positioned inside a lightweight float which is free to move up and down along the shaft so that the magnets are below the read switch. When the sensor is immersed in liquid, the float rises and the magnet activates the read switch, signaling the ATG that the high limit has been reached.
| Model Number | Description |
|---|---|
| TSP-HLS-15 | High product level sensor, 15" long, installed in tank (EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000 ATGs) |
| TSP-HLS-15/SS | High product level sensor, stainless steel 15" long, installed in tanks containing alternative fuels (EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000 ATGs) |
| TSP-HLS-30 | High product level sensor, 30" long, installed in tank (EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000 ATGs) |
| TSP-HLS-30/SS | High product level sensor, stainless steel 30" long, installed in tanks containing alternative fuels (EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000 ATGs) |
-
Note: The FMP-HLS communicates with the EVO™ 600/6000, EVO™ 550/5000
using the 2-Wire Sensor Module (TS-2WSNS) or the 3-Wire Sensor Module
(TS-3WSNS). The FMP-HLS cannot communicate with the Universal Device
Protocol Module (FMP-UDP9) or the Probe Module (TS-PRB).
Brochures
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0635 Sensors Datasheet.pdf | 3.12 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0216 (UL) FFS Product Catalog.pdf | 62.67 MB | |
 |
FFS-0807 (EN) Product Catalogue.pdf | 48.43 MB | |
 |
FFS-0367 (UL) Site Starters Ordering Guide.pdf | 52.07 MB |
Manuals
| Title | Type | Size | |
|---|---|---|---|
 |
TB0420-03 Field Wiring Cable Selection Guide.pdf | 0.57 MB |
Drawings
| Title | Type | Size | |
|---|---|---|---|
 |
CD_FMS_TSP-HLS-XX_001.dwg | DWG | 0.3 MB |
 |
CD_FMS_TSP-HLS-XX_001.pdf | 0.03 MB |