Fiberglass Entry
Fiberglass Entry
UPP® brand electrofusion fiberglass entry boots allow you to seamlessly connect UPP® brand double wall semi-rigid pipework systems to fiberglass containment sumps.
- Available in 2”, 3”, and 4” models for use with UPP® brand secondary contained pipework systems.
- Suitable for use on single and double wall containment sumps with wall thicknesses that do not exceed maximum thread width of each entry seal (4” models are not recommended for double wall or curved sump surfaces).
- Allows for electrofusion welding of secondary contained pipework directly to boot.
- Polyethylene sleeve is over-molded onto a center section with multiple dovetail grooves tying the two materials together to create a watertight joint.
Installation
The boot’s flanges are bonded to the fiberglass sump wall with the adhesive kit (sold separately), creating a solid connection between the boot and sump wall. The flanges are then covered with adhesive. Once properly installed, the boot is fully vacuum and pressure testable.
Components
- Polyethylene sleeve
- Threads
- Compression disk (threading)
- Compression disk (fixed)
- Fiberglass sump wall
- Maximum thread width
Maximum Thread Width
This indicates the maximum width of the fiberglass sump wall the entry boot can accommodate.
| Model | Thread With |
| 2”Entry Boot | 1-3/64” (26.5mm) |
| 3”Entry Boot | 1-3/64” (26.5mm) |
| 4”Entry Boot | 1-3/64” (26.5mm) |
Dimensions
Electrofusion Fiberglass Entry Boots
Additional Electrofusion fittings are required to complete the installation of these boots. See the Electrofusion Fiberglass Entry Boot Ordering Guide for details.
| Model Number | Description |
|---|---|
| FEB-075-M | 2" electrofusion fiberglass entry boot for use with 2" pipework |
| FEB-110-M | 3" electrofusion fiberglass entry boot for use with 3" pipework |
| 1137205 | Spare adhesive kit (50 ML cartridge w/ nozzle) |
| Model Number | Description |
|---|---|
| FEB-125-MM | 4" electrofusion fiberglass entry boot for use with 4" pipework |
- Order (1) Adhesive Kit per boot.
Pipe Slope Wedges
Pipe Slope Wedges (sold in pairs of 2) are for use in applications where continuation of the pipe slope is required through the sump wall to the tank access point.
| Part Number | Description |
| 10000008764 | ¼" Pipe Slope Wedge (2), for use with 2" Electrofusion Fiberglass Entry Boots |
| 10000008765 | ¼" Pipe Slope Wedge (2), for use with 3" Electrofusion Fiberglass Entry Boots |
| 10000008766 | ⅜" Pipe Slope Wedge (2), for use with 2" Electrofusion Fiberglass Entry Boots |
| 10000008767 | ⅜" Pipe Slope Wedge (2), for use with 3" Electrofusion Fiberglass Entry Boots |
Ordering Guide
Brochures
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0279 Electrofusion Fiberglass Entry Boot Datasheet.pdf | 1 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0216 (UL) FFS Product Catalog.pdf | 62.67 MB | |
 |
FFS-0807 (EN) Product Catalogue.pdf | 48.43 MB | |
 |
FFS-0367 (UL) Site Starters Ordering Guide.pdf | 52.07 MB |
Manuals
| Title | Type | Size | |
|---|---|---|---|
 |
408076001 Fiberglass Sump Entry Seal Installation Guide.pdf | 1.66 MB |
Drawings
| Title | Type | Size | |
|---|---|---|---|
 |
CD_PC_FEB-110-M_001.pdf | 0.12 MB | |
 |
CD_PC_FEB-110-M_001.dwg | DWG | 1.62 MB |
 |
CD_PC_FEB-075-M_002.pdf | 0.13 MB | |
 |
CD_PC_FEB-075-M_002.dwg | DWG | 0.64 MB |
 |
CD_PC_FEB-125-M_001.dwg | DWG | 3.12 MB |
 |
CD_PC_FEB-125-M_001.pdf | 0.57 MB |