Steel
Steel
UPP® steel electrofusion entry seals weld directly to the walls of steel chambers and underground dispenser containment. They provide a water tight seal between UPP® primary or secondary contained pipe and steel underground containment. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system.
- Ideal for DIBt markets where steel containment is a standard requirement.
- The steel sleeve is welded directly to the steel containment, eliminating the need for a rubber or mechanical seal and creating a liquid tight containment entry.
- The polyethylene spigot is electrofusion welded to UPP® pipework using 49 Series electrofusion reducers.
- The seal features an over molded design which creates a permanent leak tight bond between the polyethylene and steel sleeve.
- A yellow polyethylene sleeve is bonded to the steel sleeve for corrosion protection.
Components
- Steel electrofusion entry seal
- 49 Series reducer fitting
- Steel containment wall
- Secondary pipe (outside containment)
- Primary pipe (inside containment)
Approvals/Certifications
- DIBt approved.
| Model Number | Description |
|---|---|
| SEB-063-050 | Electrofusion Entry Seals |
| SEB-075-063 | Electrofusion Entry Seals |
| SEB-110-075 | Electrofusion Entry Seals |
| SEB-125-110 | Electrofusion Entry Seals |
- 49 Series reducer fittings must be ordered separately.
- Consult factory for availability and lead times.
Brochures
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0650 (EN) Steel Electrofusion Entry Seals Datasheet.pdf | 3.34 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0216 (UL) FFS Product Catalog.pdf | 62.67 MB | |
 |
FFS-0807 (EN) Product Catalogue.pdf | 48.43 MB | |
 |
FFS-0367 (UL) Site Starters Ordering Guide.pdf | 52.07 MB |