High Capacity 3 and 5 hp
High Capacity 3 and 5 hp
Available with either 3 Hp or 5 Hp, the FE PETRO® High Capacity Submersible Turbine Pumps. (STPs) deliver efficient, reliable and quiet performance when high volumes or high speed deliveries of gasoline or diesel fuel are required.
HIGH PERFORMANCE PUMPS
The FE PETRO® multi-stage, high capacity centrifugal pump is coupled with a dependable Franklin Electric motor to provide higher heads, faster fuel delivery and lower cost operation. Motors are all three-phase for smooth operation and are available in various voltages. Units come standard with a 6" diameter riser pipe to mount the pump to the tank.
The continuous duty, three-phase Franklin Electric motor with carbon bearings and stainless steel journals are just some of the heavy-duty features that keep our 3 Hp and 5 Hp STPs in action at some of the world's highest volume stations.
Solid Construction
The impellers, made of molded acetal, and diffusers of hard coated aluminum, with a stainless steel pump shaft, assure trouble-free operation in motor fuels.
Pressure Protection
Dual (180º opposed) 3" horizontal discharge ports, two built-in line check, and two line pressure relief valves protect the dispensers, meters, and piping from abnormal pressures due to thermal expansion.
Fuel Filtering
A built-in mesh screen on the pump inlet prevents large particles from entering the pumping system and causing system damage or slowdowns.
Should maintenance be required, high capacity pumps are designed to facilitate easy extraction without having an electrician on site.
Wire Disconnect
Large diameter pins and sockets provide automatic open circuits and disconnecting of the wiring when the extractable portion of the pump is removed.
Lifting Eyes
Properly spaced lifting eyes facilitate the removal of the unit without disturbing the discharge piping.
PMA Removal
The pump motor assembly is easily removed from the discharge head by removing four bolts and using standard pusher bolts.
Power Requirements - 60Hz
- High capacity pump models require three-phase, 60 Hz incoming power.
- High capacity pump models are available as 208-230 VAC, 460 VAC or 575 VAC versions.
- High capacity pump models are available in 3 hp and 5 hp versions.
- STP-SCIII three-phase smart controllers and STP-CB3/5 three-phase control boxes are available for high capacity pump control.
Power Requirements - 50Hz
- 50 Hz high capacity pump models require three-phase, 380-415 VAC incoming power.
- 50 Hz high capacity pump models are available in 3 hp and 5 hp versions.
- STP-SCIIIC three-phase smart controllers and STPCBB3C and STP-CBB5C three-phase control boxes are available for high capacity pump control.
Pump Motor - 60Hz
- Fixed speed, 3450 rpm, multi-stage centrifugal type pump motor with built-in, automatic, thermal overload protection.
- High capacity pump 60 Hz models are available as two-stage versions only.
Pump Motor - 50Hz
- Fixed speed, 2875 rpm, multi-stage centrifugal type pump motor with built-in, automatic, thermal overload protection.
Liquid Compatibility
- Max. liquid viscosity: 70 SSU at 60 °F (15 °C).
- Standard models are UL and cUL listed for fuel mixtures containing up to 10% ethanol and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
- STPAG models are compatible with fuel mixtures containing up to 85% ethanol and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
- HCP models can also be used with diesel fuels, fuel oils, kerosene, Avgas and jet fuels in a non-gelled pourable state.
- All wetted elastomers are made of a high grade, fluorocarbon compound.
Approvals/Certifications
- cULus listed.
- Consult factory for applicable approvals.
- Franklin Fueling Systems is an ISO 9001 Certified Manufacturer.
High Capacity Submersible Turbine Pump Model Designation System - 60Hz
STP XXXXX Y - A - B
A typical turbine model designation has up to five components to define the pump being supplied as follows:
STP = Basic Model Designation
XXXXX = Factory Installed Options
- HCP model designations may include one or more of the following characters in alphabetical order:
- F = Floating suction adapter (3" NPT male adapter)
- *R = Model R check valve (24 psi relief/22 psi reset for PLLD). *Note: If not otherwise specified, all HCP models supplied with standard model check valve (40 psi relief/35 psi reset for MLD and TS-LS300).
*Note: If not otherwise specified, all HCP models supplied with standard model check valve (40 psi relief/35 psi reset for MLD, TS-LS300, and TS-LS500).
Y = Pump Motor Horsepower Rating
- 3 = 3 hp fixed speed, 208-230 VAC
- 5 = 5 hp fixed speed, 208-230 VAC
- 5H = 5 hp fixed speed, 460 VAC
- 5G = 5 hp fixed speed, 575 VAC
A = Model Length
- Model length is expressed as three numeric characters that indicate the length of the HCP from the turbine manifold bottom to the pump motor inlet in inches, available from 60" to 200" (additional charge for models 132" and longer).
B = Riser Pipe Length
- Riser pipe length is expressed as two numeric characters that indicate the total length of the riser in inches. Riser pipes are available from 6" to 60" in three inch increments (additional charge and lead time for risers 27" or longer).
High Capacity Submersible Turbine Pump Model Designation System - 50Hz
STP XXXXX Y - A - B
A typical turbine model designation has up to five components to define the pump being supplied as follows:
STP = Basic Model Designation
Note: Standard models up to 10% ethanol capable.
XXXXX = Factory Installed Options
- HCP model designations may include one or more of the following characters in alphabetical order: AG = Alcohol-gasoline compatible (85% ethanol capable). Note: Standard models 0% to 10% ethanol capable
- F = Floating suction adapter (3" NPT male adapter)
- *R = Model R check valve (1.65 bar relief/1.51 bar reset for PLLD)
*Note: If not otherwise specified, all HCP models supplied with standard model check valve (2.76 bar relief/2.41 bar reset for MLD, TS-LS300 and TS-LS500).
Y = Pump Motor Horsepower/Electrical Rating
- 3C = 3 Hp, 380-415 VAC, 50Hz three phase
- 5C = 5 Hp, 380-415 VAC, 50Hz three phase
A = Model Length
- Model length is expressed as three numeric characters that indicate the length of the HCP from the turbine manifold bottom to the pump motor inlet in inches, available from 1524 mm to 5080 mm (additional charge for models 3353 mm and longer).
B = Riser Pipe Length
- Riser pipe length is expressed as two numeric characters that indicate the total length of the riser in inches.
- Riser pipes are available from 152mm to 1524 mm in 76mm increments (additional charge and lead time for risers 838 mm or longer).
High Capacity Turbine Pumps - 60Hz
| Model Number | Description |
|---|---|
| 401004901 | Submersible turbine pump 3 Hp 6", three-phase 208-230 VAC, 00" riser. |
| 401005901 | Submersible turbine pump 5 Hp 6", three-phase 208-230 VAC, no riser. |
| 401013901 | Submersible turbine pump 5 Hp 6", three-phase 575 VAC, no riser. |
- Please call customer service for lead time on this item.
High Capacity Turbine Pumps - 50Hz
| Model Number | Description |
|---|---|
| 401009901 | Submersible turbine pump 5 Hp 6", three-phase, 380-415 VAC, 50 Hz, no riser. |
| 401008901 | Submersible turbine pump 3 Hp 6", three-phase, 380-415 VAC, 50 Hz, no riser. |
- Please call customer service for lead time on this item.
6" STP Extractable
| Model Number | Description |
|---|---|
| HCPEXT-XXX | 6" fixed length extractable (XXX indicates Model Length, minimum 1524mm and amximum 5080mm) |
Featured
Brochures
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0778 6 High Capacity Pumps Datasheet.pdf | 3.67 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0216 (UL) FFS Product Catalog.pdf | 62.67 MB | |
 |
FFS-0807 (EN) Product Catalogue.pdf | 48.43 MB | |
 |
FFS-0367 (UL) Site Starters Ordering Guide.pdf | 52.07 MB |
Manuals
| Title | Type | Size | |
|---|---|---|---|
 |
401232001SP r19 HCP Install.pdf | 0.64 MB | |
 |
401232001 High Capacity Submerged Turbine Pumps Installation Guide.pdf | 1.48 MB | |
 |
401341001 Air Eliminator Check Valve Assembly.pdf | 0.97 MB |