32mm Flexible Conduit System
32mm Flexible Conduit System
As part of the CableTight™ Wire Management System, the 32 mm Flexible Conduit System is ideal for consolidating groups of cables into single containment entry points in markets that allow flexible conduit.
| Model Number | Description |
|---|---|
| 001-032-100-EC-E | UPP® Electrical Conduit Orange 32 mm 100 m |
| Model Number | Description |
|---|---|
| 302-032-EC | Electrofusion entry seal, for 32 mm conduit |
| 408112001 | Replacement compression nut for 302-DBC and 303-2DBC |
Entry seals come without compression grommets. Compression grommets must be ordered separately. All compression grommet cable entries are marked with maximum diameter and will accommodate a range of wire diameters (see ranges in descriptions below).
| Model Number | Description |
|---|---|
| 02-032-L | UPP® Fusion Coupler 32 mm - Long |
| Model Number | Description |
|---|---|
| 408107006 | 3 cable compression grommet - (3) 5-6 mm cable entries |
| 408163001 | 3 cable compression grommet - (3) 2-3 mm cable entries |
- Typical use: Sensors, line leak detection, interstitial tank and pipe monitoring, tank gauge wiring.
- 408107006 - Corresponding plug: 408134001
- 408163001 - Corresponding plug: 408165001
| Model Number | Description |
|---|---|
| 408107005 | Cable compression grommet - (1) 7-9 mm cable entry |
- Typical use: Tank grounding wiring.
- Corresponding plug: 408133001
| Model Number | Description |
|---|---|
| 408107004 | Cable compression grommet - (1) 9-11 mm cable entry |
- Typical use: Card reader in dispenser or outdoor payment terminal wiring.
- Corresponding plug: 408132001
| Model Number | Description |
|---|---|
| 408107003 | Cable compression grommet - (1) 12-14 mm cable entry |
- Typical use: Tank or dispenser power wiring.
- Corresponding plug: 408130001
| Model Number | Description |
|---|---|
| 408107002 | Cable compression grommet - (1) 14-16 mm cable entry |
- Typical use: Dispenser hook signal wiring.
- Corresponding plug: 408129001
| Model Number | Description |
|---|---|
| 408107007 | Blank compression grommet |
- Typical use: Line integrity testing and future expansion.
| Model Number | Description |
|---|---|
| 408129001 | 16 mm cable entry plug |
| 408130001 | 14 mm cable entry plug |
| 408131001 | 12 mm cable entry plug |
| 408132001 | 11 mm cable entry plug |
| 408133001 | 9 mm cable entry plug |
| 408134001 | 6 mm cable entry plug |
| 408164001 | 18 mm cable entry plug |
| 408165001 | 3 mm cable entry plug |
- Used to seal off unused cable entries in compression disks.
| Model Number | Description |
|---|---|
| 302-CLAMP | Clamp for UPP® Fusion Seals 302 |
| HSCS2 | Holesaw 51 mm for FEB-075-SC, FEB-100-D, FEB-100-SC & 302 Entry Seals |
| Model Number | Description |
|---|---|
| 408109001 | Removable segregation panel |
| ECH-760-660-D400 | Transition chamber, 760 mm x 660 mm |
| VTL-750X650 | Chamber Test Lid Assy 750x650 |
- Built specifically for wire management, the rugged transition chamber provides an easy access point for the electrician for maintenance or future expansion.
| Model Number | Description |
|---|---|
| PCR-LIFT | Lifting handle tool for composite access covers |
Electrical Conduit
| Model Number | Description |
|---|---|
| 001-032-100-EC-E | UPP® Electrical Conduit Orange 32 mm 100 m |
| Model Number | Description |
|---|---|
| 02-032-L | UPP® Fusion Coupler 32 mm - Long |
| Model Number | Description |
|---|---|
| 49-040-032 | UPP® Fusion Reducer 40x32 mm Secondary |
- Test Ports are 7mm Schrader valves with Protective Caps
| Model Number | Description |
|---|---|
| 302-040 | UPP® Fusion Seal 40 mm |
| Model Number | Description |
|---|---|
| 11-032-EC | UPP® Termination 32 mm 1" BSP Orange |
| Model Number | Description |
|---|---|
| 11-032-EC-075 | BLUE Termination - 32 mm ¾" NPT |
| Model Number | Description |
|---|---|
| 10-032-EC | Compression Fitting End Cap |
| Model Number | Description |
|---|---|
| 11.321 | UPP® Compression Termination 32 mm x 1" BSP Male |
Brochures
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0480 (EN) Cable-Tight Rigid Conduit System Brochure.pdf | 0.99 MB | |
 |
FFS-0479 (EN) Cable-Tight Direct Bury System Brochure.pdf | 1.83 MB | |
 |
FFS-0478 (EN) Cable-Tight Flexible Conduit System Brochure.pdf | 7.39 MB | |
 |
FFS-0463 (EN) Cable-Tight Wire Management System Datasheet.pdf | 2.9 MB | |
 |
FFS-0462 (EN) Cable-Tight Wire Management System Brochure.pdf | 9.25 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0216 (UL) FFS Product Catalog.pdf | 62.67 MB | |
 |
FFS-0807 (EN) Product Catalogue.pdf | 48.43 MB | |
 |
FFS-0367 (UL) Site Starters Ordering Guide.pdf | 52.07 MB |
Manuals
| Title | Type | Size | |
|---|---|---|---|
 |
408170001 CableTight System Install Guide.pdf | 7.1 MB | |
 |
TB1218-02 Troubleshooting CableTight Flexible Conduit.pdf | 0.35 MB | |
 |
TB1218-01 Bending Cable Tight Coated Rigid Metal Conduit.pdf | 0.43 MB | |
 |
TB0616-03 Backfill Requirements and Specifications.pdf | 0.65 MB | |
 |
408123001 CableTight Wired Management Manual.pdf | 7.63 MB |
Drawings
| Title | Type | Size | |
|---|---|---|---|
 |
CD_WM_302-032-EC_001.dwg | DWG | 0.3 MB |
 |
CD_WM_302-032-EC_001.pdf | 0.16 MB | |
 |
CD_WM_ECH-760-660-D400_003.dwg | DWG | 1.97 MB |
 |
CD_WM_ECH-760-660-D400_003.pdf | 1.15 MB | |
 |
CD_WM_DUCT-400-250_001.pdf | 0.39 MB | |
 |
CD_WM_DUCT-400-250_001.dwg | DWG | 0.62 MB |
 |
CD_WM_305-3X27MM-CON_001.pdf | 0.23 MB | |
 |
CD_WM_305-3X27MM-CON_001.dwg | DWG | 1.7 MB |
 |
CD_WM_303-075-EC_001.pdf | 0.31 MB | |
 |
CD_WM_303-075-EC_001.dwg | DWG | 0.42 MB |
 |
CD_WM_302-DBC_001.pdf | 0.12 MB | |
 |
CD_WM_302-DBC_001.dwg | DWG | 0.35 MB |
 |
CD_PC_304-110-TP_001.pdf | 0.19 MB | |
 |
CD_PC_304-110-TP_001.dwg | DWG | 0.42 MB |