Direct Bury System
Direct Bury System
As part of the CableTight™ Wire Management System, the Direct Bury System is ideal for applications where cables of 5 mm to 16 mm diameter are directly buried in the ground (such as grounding wires and armored power cables).
| Model Number | Description |
|---|---|
| 302-DBC | Electrofusion single direct bury entry seal, (1) entry |
| 303-2DBC | Electrofusion double direct bury entry seal, (2) entries |
| 408112001 | Replacement compression nut for 302-DBC and 303-2DBC |
- Direct bury entry seals are ideal for applications where cable is directly buried in the ground. Entry seals come without compression grommets. Compression grommets must be ordered separately. All compression grommet cable entries marked with maximum diameter and will accommodate a range of wire diameters (see ranges in descriptions below).
| Model Number | Description |
|---|---|
| 408107006 | 3 cable compression grommet - (3) 5-6 mm cable entries |
| 408163001 | 3 cable compression grommet - (3) 2-3 mm cable entries |
- Typical use: Sensors, line leak detection, interstitial tank and pipe monitoring, tank gauge wiring.
- 408107006 - Corresponding plug: 408134001
- 408163001 - Corresponding plug: 408165001
| Model Number | Description |
|---|---|
| 408107005 | Cable compression grommet - (1) 7-9 mm cable entry |
- Typical use: Tank grounding wiring.
- Corresponding plug: 408133001
| Model Number | Description |
|---|---|
| 408107004 | Cable compression grommet - (1) 9-11 mm cable entry |
- Typical use: Card reader in dispenser or outdoor payment terminal wiring.
- Corresponding plug: 408132001
| Model Number | Description |
|---|---|
| 408107003 | Cable compression grommet - (1) 12-14 mm cable entry |
- Typical use: Tank or dispenser power wiring.
- Corresponding plug: 408130001
| Model Number | Description |
|---|---|
| 408107002 | Cable compression grommet - (1) 14-16 mm cable entry |
- Typical use: Dispenser hook signal wiring.
- Corresponding plug: 408129001
| Model Number | Description |
|---|---|
| 408107007 | Blank compression grommet |
- Typical use: Line integrity testing and future expansion.
| Model Number | Description |
|---|---|
| 408129001 | 16 mm cable entry plug |
| 408130001 | 14 mm cable entry plug |
| 408131001 | 12 mm cable entry plug |
| 408132001 | 11 mm cable entry plug |
| 408133001 | 9 mm cable entry plug |
| 408134001 | 6 mm cable entry plug |
| 408164001 | 18 mm cable entry plug |
| 408165001 | 3 mm cable entry plug |
- Used to seal off unused cable entries in compression disks.
| Model Number | Description |
|---|---|
| 302-CLAMP | Clamp for UPP® Fusion Seals 302 |
| 303-CLAMP-1 | Clamp for UPP® Fusion Seals 303 |
| HS3 | Holesaw 102 mm for 303 & FEB-300-R Entry Seals |
| HSCS2 | Holesaw 51 mm for FEB-075-SC, FEB-100-D, FEB-100-SC & 302 Entry Seals |
| Model Number | Description |
|---|---|
| 408109001 | Removable segregation panel |
| ECH-760-660-D400 | Transition chamber, 760 mm x 660 mm |
| VTL-750X650 | Chamber Test Lid Assy 750x650 |
- Built specifically for wire management, the rugged transition chamber provides an easy access point for the electrician for maintenance or future expansion.
| Model Number | Description |
|---|---|
| PCR-LIFT | Lifting handle tool for composite access covers |
Brochures
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0480 (EN) Cable-Tight Rigid Conduit System Brochure.pdf | 0.99 MB | |
 |
FFS-0479 (EN) Cable-Tight Direct Bury System Brochure.pdf | 1.83 MB | |
 |
FFS-0478 (EN) Cable-Tight Flexible Conduit System Brochure.pdf | 7.39 MB | |
 |
FFS-0463 (EN) Cable-Tight Wire Management System Datasheet.pdf | 2.9 MB | |
 |
FFS-0462 (EN) Cable-Tight Wire Management System Brochure.pdf | 9.25 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0216 (UL) FFS Product Catalog.pdf | 62.67 MB | |
 |
FFS-0807 (EN) Product Catalogue.pdf | 48.43 MB | |
 |
FFS-0367 (UL) Site Starters Ordering Guide.pdf | 52.07 MB |
Manuals
| Title | Type | Size | |
|---|---|---|---|
 |
408170001 CableTight System Install Guide.pdf | 7.1 MB | |
 |
TB1218-02 Troubleshooting CableTight Flexible Conduit.pdf | 0.35 MB | |
 |
TB1218-01 Bending Cable Tight Coated Rigid Metal Conduit.pdf | 0.43 MB | |
 |
TB0616-03 Backfill Requirements and Specifications.pdf | 0.65 MB | |
 |
408123001 CableTight Wired Management Manual.pdf | 7.63 MB |
Drawings
| Title | Type | Size | |
|---|---|---|---|
 |
CD_WM_ECH-760-660-D400_003.pdf | 1.15 MB | |
 |
CD_WM_ECH-760-660-D400_003.dwg | DWG | 1.97 MB |
 |
CD_WM_302-DBC_001.pdf | 0.12 MB | |
 |
CD_WM_302-DBC_001.dwg | DWG | 0.35 MB |
 |
CD_WM_DUCT-400-250_001.pdf | 0.39 MB | |
 |
CD_WM_DUCT-400-250_001.dwg | DWG | 0.62 MB |
 |
CD_WM_305-3X27MM-CON_001.pdf | 0.23 MB | |
 |
CD_WM_305-3X27MM-CON_001.dwg | DWG | 1.7 MB |
 |
CD_WM_303-075-EC_001.pdf | 0.31 MB | |
 |
CD_WM_303-075-EC_001.dwg | DWG | 0.42 MB |
 |
CD_WM_302-032-EC_001.pdf | 0.16 MB | |
 |
CD_WM_302-032-EC_001.dwg | DWG | 0.3 MB |
 |
CD_PC_304-110-TP_001.pdf | 0.19 MB | |
 |
CD_PC_304-110-TP_001.dwg | DWG | 0.42 MB |