EN Cable-Tight™ System
EN Cable-Tight™ System
The CableTight™ Wire Management System provides a true end-to-end solution for electrical, sensor, and data wiring containment. All of the benefits of the field-proven electrofusion welded pipework system are applied to this crucial part of the forecourt installation to ensure a fully liquid-tight underground system.
A BETTER WAY TO INSTALL FORECOURT WIRING
The CableTight™ Wire Management System provides a true end-to-end solution for electrical, sensor, and data wiring containment.
Electrofusion welded entry seals create seamless connection between the conduit and containment while the integrated slotted compression disks give a complete 360 degree seal around every wire. These two crucial seal points ensure a tight system.
Electrofusion Welding
With the electrofusion welding process, the entry seal, conduit or ducting, and containment become one, leak proof system eliminating liquid or vapor penetration.
Compression Disc
The unique compression discs and grommets individually grip each wire eliminating the potential for water or vapor intrusion.
Compression Nut
A compression nut is tightened into place on the inside of the containment, locking the entire wire assembly into a liquid and vapor-tight assembly.
Whatever the market or standard, there is a liquid-tight entry seal to match the application. Each fitting type is also available with interchangeable compression disc options so it can be customized to each specific wire diameter.
Flexible Conduit
The multi-cable entry seal is ideal for consolidating groups of 5 mm to 17 mm diameter wires into one entry point.
Direct Bury
Direct bury entry fittings are ideal for applications where cable is directly buried in the ground, such as grounding wires and armored power cables.
Rigid Conduit
The rigid conduit entry fitting handles one to three ¾" bore rigid conduit entries where local regulations require steel conduit.
We studied forecourts across the world to determine common cable diameters and delivered an optimized conduit and ducting offering to match the needs of each market.
The Right Diameter
Flexible conduit is available in 32 mm and 75 mm diameters and ducting is available in 110 mm diameter.
No Buried Joints
100 m (32 mm conduit), 50 m (75 mm conduit), and 75 m (110 mm ducting) coils allow for long runs, eliminating the need for buried joints.
Non-Corrosive
Unlike steel, the durable and lightweight polyethylene construction of the conduit and ducting make it corrosion resistant for a long service.
Built specifically for wire management, the rugged transition chamber minimizes cost and the size of the containment space while providing an easy access point for the electrician for maintenance or future expansion.
Integrated Cover
Features an integrated liquid-tight, load-rated cover minimizing installation time and keeping liquid out of the containment space.
Profiled Base
A unique profiled bottom base provides wire management and prevents wires from being damaged while standing or working inside.
Shield Plate
A removable shield plate barrier provides separation for cable and sensor wiring.
All of the benefits of the field-proven electrofusion welded pipework system are applied to this crucial part of the forecourt installation to ensure a fully water and vapor-tight underground system.
- Conduit and ducting Internal bore diameters: 25mm (32mm conduit), 65mm (75mm conduit), 106mm (110mm ducting)
- Max vapour seal penetration in containment: 60mm (75mm conduit), 50mm (32mm conduit), 50mm (direct bury)
- Transition chamber is a combination of an LLDPE chamber and a D400 load rated composite access cover and frame (factory tested to -30mbar)
- Transition chamber dimensions: W900 x D800 x H862
Approvals/Certifications
- Conduit approval to AS/NZS 2053.1:2001
75mm and 110mm, 32mm and 110mm Contained
Systems and their various components installed.
- Transition chamber with cover
- 75mm conduit
- 75mm multi-cable entry seal
- 110mm ducting
- 110mm entry seal
- 32mm conduit
- 32mm entry seal
- 32mm coupler
Direct Bury and Rigid Conduit System
Systems and their various components installed.
- 1. Double direct bury entry seal
- 2. Single direct bury entry seal
- 3. Triple rigid conduit entry seal
- 4. Rigid conduit (locally supplied)
Transition Chamber
Brochures
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0480 (EN) Cable-Tight Rigid Conduit System Brochure.pdf | 0.99 MB | |
 |
FFS-0479 (EN) Cable-Tight Direct Bury System Brochure.pdf | 1.83 MB | |
 |
FFS-0478 (EN) Cable-Tight Flexible Conduit System Brochure.pdf | 7.39 MB | |
 |
FFS-0463 (EN) Cable-Tight Wire Management System Datasheet.pdf | 2.9 MB | |
 |
FFS-0462 (EN) Cable-Tight Wire Management System Brochure.pdf | 9.25 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0216 (UL) FFS Product Catalog.pdf | 62.67 MB | |
 |
FFS-0807 (EN) Product Catalogue.pdf | 48.43 MB | |
 |
FFS-0367 (UL) Site Starters Ordering Guide.pdf | 52.07 MB |
Manuals
| Title | Type | Size | |
|---|---|---|---|
 |
408170001 CableTight System Install Guide.pdf | 7.1 MB | |
 |
TB1218-02 Troubleshooting CableTight Flexible Conduit.pdf | 0.35 MB | |
 |
TB1218-01 Bending Cable Tight Coated Rigid Metal Conduit.pdf | 0.43 MB | |
 |
TB0616-03 Backfill Requirements and Specifications.pdf | 0.65 MB | |
 |
408123001 CableTight Wired Management Manual.pdf | 7.63 MB |
Drawings
| Title | Type | Size | |
|---|---|---|---|
 |
CD_WM_ECH-760-660-D400_003.pdf | 1.15 MB | |
 |
CD_WM_ECH-760-660-D400_003.dwg | DWG | 1.97 MB |
 |
CD_WM_DUCT-400-250_001.pdf | 0.39 MB | |
 |
CD_WM_DUCT-400-250_001.dwg | DWG | 0.62 MB |
 |
CD_WM_305-3X27MM-CON_001.pdf | 0.23 MB | |
 |
CD_WM_305-3X27MM-CON_001.dwg | DWG | 1.7 MB |
 |
CD_WM_303-075-EC_001.pdf | 0.31 MB | |
 |
CD_WM_303-075-EC_001.dwg | DWG | 0.42 MB |
 |
CD_WM_302-DBC_001.pdf | 0.12 MB | |
 |
CD_WM_302-DBC_001.dwg | DWG | 0.35 MB |
 |
CD_WM_302-032-EC_001.pdf | 0.16 MB | |
 |
CD_WM_302-032-EC_001.dwg | DWG | 0.3 MB |
 |
CD_PC_304-110-TP_001.pdf | 0.19 MB | |
 |
CD_PC_304-110-TP_001.dwg | DWG | 0.42 MB |